SA Inc M1A krinkle finish stock - Gun Hub
Gun Hub

Go Back   Gun Hub > Gun Hub Forum > Gun Gear

Reply
 
LinkBack Thread Tools Display Modes
Old 11-22-2004, 03:35 PM   #1
 
Join Date: Apr 2003
Posts: 31
SA Inc M1A krinkle finish stock

What would be the best way to remove the black krinkle finish from a SA Inc synthetic stock?

Respects,
Zog
djzog is offline  
Old 11-23-2004, 02:25 PM   #2
ted
 
Join Date: Mar 2004
Posts: 1,984
I imagine any good paint stripper would work if you left it on long enough.

I highly recommend Klean-Strip brand KS-3 Premium Stripper.
Glob it all over the stock and let it sit for a half hour. Then you will understand the true meaning of krinkle.

The other option is to leave the stock as is and lightly tap it against the ground once or twice. All the paint should fall right off. :P

Just try the Klean-Strip.

Ted
ted is offline  
Old 12-05-2004, 07:23 AM   #3
Senior Member
 
Join Date: Oct 2004
Location: People's Republic of Wisconsin
Posts: 330
Kwik-n-easy.Buy a new stock from Fred's. Start clean and new.
griffin1340 is offline  
 
Old 02-07-2005, 03:55 AM   #4
 
Join Date: Apr 2003
Posts: 31
Well I finally got around to stripping the stock. Ended up using a product caled BIX "Original Stripper". This stuff is a thick liquid, almost a gel, that you brush on. It comes in a red and white container that you can find in Walmart, Home Depot, etc.

Did the stock in three section. Applied the stripper with a brush and let set for 40-45 minutes. When I came back each section was nicely "bubbled". The stripper cut through the finish and the primer coat. All I ended up doing was washing each section off with water and hitting the nooks and crannies with with some steal wool/brush.

Overall this was allot easier to do than I first anticipated.

Respects,
Zog
djzog is offline  
Reply

  Gun Hub > Gun Hub Forum > Gun Gear

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stock Finish - pics / before and after Redhawk03A M14 4 04-24-2008 02:29 PM
Finish your stock before bedding... ardog1 M14 6 07-16-2007 09:59 PM
How to remove krinkle finish? Hang-Fire Gun Gear 4 12-01-2005 10:20 AM
WTS SA Black Krinkle Stock SOLD !!! Lock_n_Load Accessories 4 06-11-2005 10:34 AM
SA Inc,stock finish Midnight Sun Gun Gear 1 03-22-2005 01:55 PM




Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2020 Gun Hub. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.